Home > Products > Measurement Equipments > PIMD Analyzer Due to the increase in the traffics of voice information, text information and video information by users, wireless communication systems with enlarged capacities and heightened ultra high speed are experiencing more and more distortions of information signals influenced by potential mutual interferences.Thus, Because of interference potentials raised by the enlargement of mobile communication systems, it is demanded to measure IMD of Passive components(antenna, RF connector, cable, electricity distributor, directional combiner, filter, duplexer, etc) through components performance test for the prevention of system communication quality deterioration. AWT Co., Ltd. develops and produces the equipments can measure IMD in GSM, Wibro, UMTS/IMT2000, DCS/PCS, AMPS/CDMA, EGSM, WIMAX band. These are the equipments that measure and evaluate severe signal interference problems of wireless communication systems by simple measurement of presently commercially used RF Passive components mutual modulation distortions. NEW Ver 1.1.6 1. Employed DSP processor provides high speed IF signal processing capability and    outstanding compatibility · Transmit/Receiver Band Frequency · IM Measure of 'frequency', 'Time', 'Frequency Sweep' Mode · 44 dBm maximum output power · Reverse / Forward IM measurement in outstanding characteristics · Support Development/ Production Mode · Single or Dual Band Select 2. Adopted high speed DSP circuit and measurement algorithm enabling ultra precision measurement(over -183dBc) 3. Capable to display max 4 orders of degree of IMD simultaneously 4. Supports RS-232C serial interface Main Body · Lamp that displays Reverse/Forward · Lamp that displays 1Port output/2Port output · DIN type connector of Reverse와 Forward · 19” rack type · Simple front design · Built-in DC power Low IM Terminator AWT-TERM-LIM Outstanding IMD characteristics with 800MHz~2500MHz bandwidth Computer Laptop or desktop computer containing serial port(RS-232C) Accessories Provides Low IM adaptor and case which are required for using PIMD ANALYZER 1. Development Mode    The mode often used while developing passive components. It measures and stores real-time    the IMD valueof the equipment(DUT) to be measured. 2. Production Mode    The mode for the passive components to be produced. It determines whether the configured joint    area is passed or not by measuring real-time the IMD value of the equipment(DUT) to be measured,    and prints out and stores the result for report.. 3. Measured Data Printing and Image Saving    By storing the measured data into image file or printing out as a report while measuring IM values,    it stores and manages the data easily. 4. History Storing    It stores as text files the information sent and received in Development Mode and Production    Mode, and the IM value measured real-time, and analyzes the changes of IM characteristics    of the equipment(DUT) to be measured. * User-friendly software: Easy to use and customizable upon customer’s demand(optional)